Intercontinental Casting — Integrated Supply Chain Platform for Non-standard Casting Parts

Discussion on Structure Selection and Power-Saving Approaches for Medium-Frequency Induction Furnaces

Publication Date : 2022-11-08 09:29:29

Discussion on Structure Selection and Power-Saving Approaches for Medium-Frequency Induction Furnace

Li Kun1,2,3, Zhang Lele1, Tong Binbin1, Pang Helin1, Chen Tong1, Zhang Panhui1

(1. Xi'an Electric Furnace Research Institute Co., Ltd., Xi'an 710061, Shaanxi; 2. Shaanxi Provincial Four-Entity One-Joint Electric Furnace Engineering Technology Center, Xi'an 710061, Shaanxi; 3. MCC Electric Furnace Engineering Technology Center, Xi'an 710061, Shaanxi)

Source: Industrial Heating

 

CLC number:TF748.52   Document code:A   Article number:1002-1639(2022)06-0007-03

 

Discussion on Structure Selection of Intermediate Frequency Induction Furnace and Ways to Save Electricity

 

LI Kun1,2,3,ZHANG Lele1,TONG Binbin1,PANG Helin1,CHEN Tong1,ZHANG Panhui1

 

( 1. Xi'an Electric Furnace Research Institute Co. Ltd. ,Xi'an 710061,China; 2. Shaanxi Province Four Main Body One Joint Electric Furnace Engineering Technology Center,Xi'an 710061,China; 3. MCC Electric Furnace Engineering Technology Center,Xi'an 710061,China)

 

Cupolas were frequently used in past casting production and cast iron melting, but they have low heating efficiency, large heat loss, and are subject to environmental protection policy requirements, so they have now been gradually eliminated. The emergence of medium-frequency induction melting furnaces has greatly improved problems such as slow heating speed, high heat loss, and low efficiency, and to a certain extent saves energy, saves costs, improves production efficiency, and purifies the workshop environment. In the cast iron process, molten iron obtained by cupola often has relatively high sulfur content[1-2]。

Mechanical equipment and electrical equipment are the two major components of a medium-frequency induction furnace. The tilting mechanism and water cooling system are relatively important mechanical equipment, while the medium-frequency power supply, electrical control and protection system, and compensation capacitor bank are the core electrical equipment of the medium-frequency induction furnace. Different system parameters and selections will directly affect the capacity, efficiency, and indicators of the melting device. Therefore, correctly selecting the configuration parameters of melting equipment has a great impact on the comprehensive benefits of production. When selecting the structure of a medium-frequency induction melting furnace, basic indicators such as investment budget, capacity requirements, quality parameters, and comprehensive benefits should be comprehensively considered. The comprehensive benefits after the equipment is put into production are the fundamental basis.

 

1 Power Utilization Conditions and Capacity Requirements of Medium-Frequency Induction Furnace

1.1 Incoming Line Voltage of Medium-Frequency Induction Furnace

Generally, if the power of the medium-frequency power supply is less than1000 kW, a three-phase five-wire system should be followed, that is, industrial power (three-phase, 50 Hz, 380 V) equipped with a six-pulse single-rectifier medium-frequency power supply; on the contrary, if it is greater than 1000 kW, a 660 V standard incoming line voltage equipped with twelve-pulse double rectification is generally required. High-power medium-frequency power supplies generate harmonics that interfere with the power grid. Twelve-pulse double rectification is selected to increase the incoming line voltage and thereby increase the rated working voltage, while at the same time obtaining relatively smooth DC current[2]. If necessary, configure harmonic filtering and power factor compensation equipment or static var compensator equipment at the input end(SVC), etc., to meet the power quality requirements of the power grid. It should be emphasized here that if non-standard voltage levels such as 480 V, 575 V, or 690 V are selected, it will cause trouble for the later selection of spare parts and is not advisable.

Incoming line voltage is relative and is not the higher the better. If energy is saved solely through high voltage and low current, it will cause copper busbars and cables to fatigue and shorten the service life of equipment and electronic components.

1.2 Transformer Capacity of Medium-Frequency Induction Furnace

Based on power factor and safety margin, the rectifier transformer capacity should be1.08–1.15 times the power supply power, depending on the type of power supply. The SCR thyristor full-bridge parallel inverter medium-frequency power supply is currently commonly used in the domestic induction melting industry, and its transformer capacity is about 1.2 times the power supply power. For an IGBT half-bridge series inverter medium-frequency power supply, it has both high input impedance and low conduction voltage drop, and is stable and energy-saving. “One power supply driving two furnaces” means that according to production requirements, one furnace is used for melting and one for holding, which helps improve the utilization rate of electrical equipment and production efficiency. When the two furnace bodies work at the same time, the transformer capacity at this time can reach 1.1 times the medium-frequency power supply power, and relatively speaking, the utilization rate is improved. Special attention should be paid to the fact that the rectifier transformer should be dedicated to a specific machine as much as possible, that is, the medium-frequency power supply and the rectifier transformer should be used as a matching set, which helps reduce interference of harmonics on the power grid[2-4]。

1.3 Capacity Requirements of Medium-Frequency Induction Furnace

Generally speaking, through the daily required molten iron mass and single-piece product mass, the total capacity of the medium-frequency induction melting furnace can be determined, and then a suitable medium-frequency power supply can be selected according to the total capacity. Because induction heating equipment is a non-standard product, currently following industry practice, the selection and configuration of medium-frequency power supplies in the induction melting industry are shown in Table1.

 

Table1 Medium-Frequency Power Supply Selection and Configuration Table

No.

Total capacity/t

Frequency/Hz

Power/kW

1

0.15

1000

75

2

0.25

1000

125

3

0.50

1000

250

4

0.75

1000

375

5

1.0

1000

500

6

1.5

1000

750

7

2

500

1000

8

3

500

1500

9

5

500

2500

10

8

250

4000

11

10

250

5000

12

12

250

6000

13

15

250

7500

14

20

250

10000

 

According to industry practice, the ratio of induction melting furnace power to total capacity is called the power density of the induction furnace. Power density is also an important indicator of a medium-frequency induction melting furnace, and its theoretical optimal value is generally600–800 kW/t. From the calculation of the medium-frequency power supply selection and configuration table, it can be seen that the power density of the common industry selection configuration is relatively low compared with the theoretical optimal value.

When the furnace body capacity is constant, the lower the power density, the longer the melting time and the lower the melting efficiency. Therefore, when the total furnace body capacity is unchanged, if the power density is increased by100 kW/t or more, the melting time per heat will be greatly shortened. However, higher power density will produce severe electromagnetic stirring, which will greatly reduce the service life of equipment and furnace lining. Therefore, if enterprises can make breakthroughs in lining materials, furnace building methods, and melting processes, melting efficiency will be greatly improved.

2 Selection of Medium-Frequency Induction Furnace Structure

2.1 Selection of Medium-Frequency Induction Furnace Shell

Problems such as overall rigidity of the furnace body, influence of magnetic leakage, coil performance, water circuit monitoring, and furnace leakage alarm are key points that need to be considered when designing a medium-frequency coreless induction furnace, and reliable and effective safety measures should be formulated for these problems. Flexibly adjust the output power of the frequency conversion device according to different processes, and adjust the power distribution of each furnace according to process requirements. The connection structure of the water-cooled cable should also ensure good conductivity, no water leakage, reliable connection, etc.[5]. According to the convention of the induction melting industry, a steel-structure induction melting furnace with a hydraulic cylinder as the furnace tilting device is called a steel shell furnace; similarly, an aluminum alloy-structure induction melting furnace with a reducer as the furnace tilting mechanism is called an aluminum shell furnace. With a capacity of1 t cast iron melting furnace as an example, the differences between steel shell furnaces and aluminum shell furnaces are listed in Table 2.

 

Table2 Differences Between Steel Shell Furnace and Aluminum Shell Furnace

Comparison item

Steel shell furnace

Aluminum shell furnace

Shell material

Steel structure

Aluminum alloy structure

Furnace tilting device

Hydraulic cylinder

Reducer

Furnace leakage alarm

Yes

No

Hydraulic pump

Yes

No

Magnetic yoke

Yes

No

Furnace cover

Yes

No

Power consumption/kW·h·t-1

580

630

Service life/year

10

4-5

Price

High

Low

 

From Table2, it can be found that the steel shell furnace is sturdy and durable, safe and reliable, has a long service life, low energy consumption, and is equipped with a magnetic yoke made of silicon steel sheets. When the induction coil works, it generates a large number of magnetic lines of force, but part of the magnetic lines of force will diffuse out through the furnace shell, that is, magnetic leakage. Because the steel shell furnace has a magnetic yoke structure, it can effectively shield and emit magnetic lines of force, thereby reducing magnetic leakage and greatly improving the thermal efficiency of induction melting. Although the aluminum shell furnace has a low cost, its furnace tilting mechanism has poor safety performance, and the furnace shell is prone to oxidation and deformation at high temperatures, causing metal toughness fatigue and even cracks in the furnace shell.

For an aluminum shell furnace, its furnace shell is generally cast from aluminum alloy, and both weight and thickness are relatively small[3]. The aluminum shell furnace itself is relatively low in price. The author believes that it is not advisable to choose only for low price while ignoring safety, energy consumption, and service life.

As mentioned above, the magnetic yoke structure of a steel shell furnace can effectively reduce magnetic leakage. Therefore, the most important part of the steel shell furnace structure is the magnetic yoke. The magnetic yoke of a steel shell furnace is generally made by stacking and tightening cold-rolled silicon steel sheets. This cold-rolled silicon steel sheet should have significantly high magnetic permeability andZ11 orientation. During installation, it should be clamped and welded in place by stainless steel on both sides, and a water cooling device can be equipped when required by the process. When designing the magnetic yoke, its shape, structure, cross-sectional area, and dimensions should be able to shield magnetic lines of force, reduce magnetic leakage, prevent the furnace shell from heating, and at the same time should be conducive to the cooling and heat dissipation of the silicon steel sheets, reduce noise, and reliably support the induction coil. The design of the magnetic yoke should also consider whether it is convenient to disassemble, assemble, maintain, and observe the induction coil. The inner arc surface curvature of the magnetic yoke is the same as the outer arc surface curvature of the induction coil. At this time, the magnetic yoke is exactly close to the outer side surface of the induction coil and can maximize shielding of magnetic line divergence and reduce magnetic leakage[2-3]。

2.2 Selection of Lining for Medium-Frequency Induction Furnace

The lining of induction heating equipment is one of the important components ensuring reliable, durable, and energy-saving operation of the device. It usually consists of a refractory layer and an insulation layer, and integrally formed products may also be partially used.

Lining materials and products should have good refractoriness and insulation performance, and at the same time should have relatively high mechanical strength, a small expansion coefficient, good chemical stability, electrical insulation performance, and thermal shock resistance. A reasonable lining thickness design can reduce heat loss to a certain extent and improve thermal efficiency, but it should not store too much heat; otherwise, the electrical efficiency of induction heating will decrease. Generally, refractory fibers, lightweight foam bricks, nanoporous siliceous materials, etc., with low heat storage and low thermal conductivity are used. It is worth noting that when selecting lining materials, reactions between heating elements, molten liquid, or special furnace atmospheres and the directly contacting lining should be avoided.[5-6]。

2.3 Selection of Copper Tubes, Copper Bars, and SCRs for Medium-Frequency Induction Furnace

The silicon controlled rectifier (SCR) is abbreviated as SCR; an SCR is a high-power semiconductor device with threePN junctions and a four-layer structure. Because of its simple structure, strong functionality, and small size, it is also called a thyristor. However, the quality and lifespan of SCR products produced by different manufacturers are generally uneven. A good-quality SCR has high temperature sensitivity, fast response, and a low failure rate. Therefore, it is recommended to choose SCR products produced by well-known manufacturers, which not only have reliable quality guarantees but also stable performance and long life.

The price, effect, and lifespan of cold-extruded copper tubes and copper bars for induction coils of different specifications and models vary. According to industry practice, the material used for induction coil conductors should be no less thanT2 rectangular, square, round, or other shapes of copper tubes, and the outer surface should be subjected to insulation treatment by electrostatic spraying, with an insulation class of at least H. Generally, to protect the insulation strength of copper tubes, a layer of alkali-free glass fiber tape or mica tape can be wound and wrapped around their surface; when necessary, moisture-proof insulating enamel can also be sprayed. Considering the overall rigidity and heat dissipation of the induction coil, stainless steel water-cooled heat dissipation tubes can be added at the upper and lower ends of the coil. This not only facilitates coil heat dissipation but also improves the overall rigidity of the coil.

2.4 Selection of Power Cabinet, Capacitors, and Reactors for Medium-Frequency Induction Furnace

The power cabinet of a medium-frequency induction furnace is also one of the relatively important electrical devices. The medium-frequency power supply should be equipped internally with a low-voltage switch for short-circuit protection. When selecting a power cabinet, all electrical parameters should closely match the needs of the production process, and dimensions and specifications should also comply with industry standards.

The role of capacitors is mainly to perform reactive power compensation, so a capacitor bank that meets the requirements must be provided. According to industry practice, the general capacitive compensation amount is18–20 times the power supply power. Silicon steel sheets are the main material of reactors, but brand-new silicon steel sheet products produced by regular manufacturers should be selected; second-hand silicon steel sheets cannot be used.

In complete sets of medium-frequency induction furnace equipment, there are often a large number of connecting water pipes. Strictly speaking, connecting water pipes should be made of stainless steel. Copper unions are relatively convenient to install and disassemble, basically require no maintenance, are conducive to current transmission, and will not leak water. They are safe and reliable, and are very suitable for water-cooled cables.

In addition, the selection of water-cooled cables, connecting copper bars, resistors, capacitors, etc., also affects the overall quality of the equipment. For enterprises, hidden safety hazards caused by improper selection of components are the most fatal. Therefore, when enterprises initially select and purchase supporting equipment, they should focus on the structure and quality of parts and components, rather than ignoring quality and focusing on low price; otherwise, hidden dangers will be left for later production and maintenance.

3 Ways to Save Electricity in Medium-Frequency Induction Furnaces

Based on the production characteristics of medium-frequency induction furnaces, this section discusses ways and measures to save electricity in the production process of medium-frequency induction furnaces from aspects such as batching and charging, melting time, melting operation, and power supply mode.

3.1 Reasonable Batching

The electricity consumption per heat in induction melting is very large. This requires that before melting, the charge composition must be analyzed, batching calculations must be carried out, and charge materials must be reasonably matched. This can avoid scrapping molten steel or readjusting the charge composition due to mixed charge composition. Blind batching and charging for melting will not only increase the impurity content of molten steel but also lead to longer melting labor hours, with the number of heats, material consumption, and electricity consumption increasing accordingly.

Therefore, reasonable sorting, packaging, and batching of charge materials help ensure smooth charging and reduce charge consumption and electricity consumption per heat.[7]。

3.2 Reasonable Selection of Melting Operation Mode

The melting electricity consumption of a medium-frequency induction furnace is greatly related to the production mode. The working modes of induction furnaces are divided into three types: continuous operation, discontinuous operation, and intermittent operation. As is well known, continuous melting operation has the lowest electricity consumption, discontinuous melting is next, and intermittent melting has the highest electricity consumption. Therefore, when conditions permit, enterprises should operate continuously as much as possible and extend hot-furnace melting time to achieve electricity-saving effects. Continuous melting has many heats and a long total time. When output is fixed, low frequency and fewer times of cold-furnace melting also help extend lining life.

3.3 Reasonable Melting Operations

The melting speed and melting time of the charge depend on whether batching and charging are scientific and reasonable. During medium-frequency induction heating, because the distribution density of magnetic field lines in the middle and lower parts of the crucible is relatively high, the stacking density in the middle and lower parts of the crucible should be as high as possible when charging. During melting, the probability of magnetic field lines passing through gaps in the charge is small, so induction heating efficiency is high, melting speed is fast, and melting time is short.

During charging, the temperature of molten steel should be maintained as much as possible. To avoid molten steel crusting caused by temperature differences, the charge should be added in small amounts multiple times, and the charge should be actively poked to prevent the occurrence of“camel hump” and “bridging”; otherwise, local overheating in the furnace will greatly shorten the lining life. Melting slag has a good covering and insulation effect and can reduce radiation heat loss of high-temperature molten steel. Therefore, during the melting period, slagging should be strengthened and reasonably utilized.

A reasonable power supply mode is also indispensable. When power is just turned on, there is often a current impact phenomenon, resulting in low power utilization. Heating can first be carried out at 60% power, and after the current impact stops, it can be quickly adjusted to full power for melting. In addition, reasonably controlling tapping temperature and selecting furnace-building materials can also achieve electricity-saving effects.[8]。

4 Conclusion

Medium-frequency induction furnaces are widely used in melting processes due to advantages such as low investment, quick return, and high thermal efficiency. However, high electricity consumption in induction melting has always been a concern for many enterprises and is also a key energy-saving issue urgently to be solved in the induction melting industry. This article briefly analyzes the power usage conditions, capacity requirements, and structural selection schemes of medium-frequency induction furnaces, and puts forward several electricity-saving suggestions from aspects such as furnace-building materials, power supply system, batching and charging, melting time, and melting operation. Due to the author's limited experience, what is stated in this article is for reference only.

 

References

[1] Wu Dianjie, Li Yuqing. Comparison of Melting Characteristics of Cupola and Induction Furnace and Selection Analysis [C]// The 25th Foundry Conference of Shanxi Province. Jincheng: [Publisher unknown], 2013:45-50.

[2] Lu Yanhui. Research on Medium Frequency Furnace [J]. Modern Business Trade Industry, 2010(19):264-266.

[3] Guo Jianping. Ways of Saving Electricity in Medium-Frequency Induction Furnace Production [J]. Research on Foundry Equipment, 2005(4):25-27.

[4] Xiao Lianhua, Cao Ruirong. Technical Management Practice for Economic Operation of Medium-Frequency Induction Electric Furnaces [J]. Foundry Equipment and Technology, 2017(1):10-12.

[5] Standardization Administration of China. 10067.1-2019 Basic Technical Conditions for Electroheat and Electromagnetic Treatment Installations [S]. Beijing: Standards Press of China, 2019.

[6] Standardization Administration of China. 10067.31-2013 Basic Technical Conditions for Electroheat Installations [S]. Beijing: Standards Press of China, 2013.

[7] Zhang Li. Research on Application of Medium-Frequency Heating Power Supply in Foundry Melting Furnace [D]. Qingdao: Shandong University, 2008.

[8] Wang Wei, Gao Shihong. Main Measures for Power Saving of Induction Furnaces [J]. Harbin Bearing, 2007, 28(4):63-64.