Intercontinental Casting — Integrated Supply Chain Platform for Non-standard Casting Parts

Blog

Corrosion-Resistant Irons: Choosing for Harsh Service

Process Guide

Corrosion-Resistant Irons: Choosing for Harsh Service

A practical comparison of alloyed cast irons, coated irons, and stainless steel for corrosive service, with lifecycle cost ranges, selection checklists, and the questions buyers should ask before specifying.

Read article →2026-11-18

Latest Articles

A356 Aluminum Castings: Heat Treatment and Design Limits

A356 Aluminum Castings: Heat Treatment and Design Limits

2026-11-17

A practical guide for B2B buyers on T6 heat treatment of A356 aluminum castings, how porosity sensitivity affects yield and properties, typical applications, and the design rules that keep castings sound and cost-effective.

Process Guide
Bronze Alloys for Bearings: C90700, C93200 and Friends — Load vs Embeddability Trade-offs and Substitution Traps

Bronze Alloys for Bearings: C90700, C93200 and Friends — Load vs Embeddability Trade-offs and Substitution Traps

2026-11-16

A practical guide for buyers specifying tin and leaded tin bronzes for bushings and bearings. Covers C90700, C93200, C93600 and C93800, the real trade-off between load capacity and embeddability, hardness and PV limits to check before you switch...

Process Guide
CF8 vs CF3M: Stainless Casting Grades Decoded for Buyers

CF8 vs CF3M: Stainless Casting Grades Decoded for Buyers

2026-11-15

CF8 and CF3M are the two workhorse austenitic stainless casting grades behind most pumps, valves, and fittings sourced from China. This guide breaks down the carbon and molybdenum difference, what it means for corrosion in real service, and how to...

Process Guide
Dual Sourcing Castings Without Doubling Tooling: Pattern Sharing, Cross-Qualification, and Split Ratios

Dual Sourcing Castings Without Doubling Tooling: Pattern Sharing, Cross-Qualification, and Split Ratios

2026-11-14

Dual sourcing castings usually fails on the tooling line item, not the casting price. This guide shows how overseas buyers can run two qualified foundries from one pattern set, cross-qualify the second source on first-article evidence, and set a...

Industry News
Why Mass Production Differs From Your Approved Sample

Why Mass Production Differs From Your Approved Sample

2026-11-13

Your approved sample and your production shipment were made by the same supplier, on the same drawing — yet they can differ in wall thickness, hole position, surface finish and alloy. This article explains the four mechanisms behind that drift...

Industry News
Third-Party Inspection for Castings: When to Book SGS or TÜV

Third-Party Inspection for Castings: When to Book SGS or TÜV

2026-11-11

A practical guide for overseas buyers on deciding when a third-party inspection of castings is worth the fee, what an inspector actually covers in a single day, and how to set a sampling plan that matches the risk of your order.

Industry News